VCT Stripping and Sealing in Phoenix, AZ

 Call us 602.620.7881 If your VCT (Vinyl Composite Tile) also known as Armstrong tile is looking dull and scuff marks everywhere. With proper floor maintenance, Vinyl Composite Tile (VCT) can retain its beautiful appearance for decades. If your floor looks dull, stained or soiled, you need to call Prestige Floor and Carpet Care immediately. For over 30 years, we have been making VCT floors look like new again. Our professionally trained technicians will strip, wax, seal and burnish your VCT floor, thus prolonging the life of your investment in Phoenix, AZ

Vinyl Composite Tile VCT also known as Armstrong tile can be stripped and waxed. Call Prestige Floor and Carpet Care 602.620.7881 for a free quote and demonstration. This is the vinyl tile that is in a lot of schools, commercial businesses and churches in Phoenix, AZ.

After years of heavy traffic and the movement of gondolas and other fixtures, old stripper and miscellaneous chemical run-off can leave VCT floor looking dirty and old. These hardened chemicals will only respond to heavy duty stripping using the most professional equipment and the most proven VCT floor care methods.

What do you want the VCT to look like? VCT should always have a gloss to it. There are a lot of companies who only put 1 or 2 coats on the VCT and either they are adding to what was there prior or that is all they do due to the cost of finish.

How do we do it? Prestige Floor and Carpet Care removes all finish from the VCT, details the edges, and protects the baseboards during the finish being applied in Phoenix, AZ. We at Prestige Floor and Carpet Care do detail wax removal on edges of the walls and around door frames. We apply the finish with micro pads by any baseboards so that the finish does not get on them, then large mops for the rest of the VCT Tile

How much does it cost? The cost for fully stripping all finish and applying 5-6 coats runs from .85 cents to 1.50 per square foot depending on a lot of tile situations. The starting price is for VCT that the wax is stripped with one step and the higher cost is if the vinyl floor in Phoenix, AZ has many coats of finish and large build up spots under furniture that has been moved. Like a soda machine that has been in the same spot for years and the floor has been waxed many times. The wax builds up under the soda machine and when it is moved it takes more stripper and time to remove it.

How long does it last? If cleaned properly and burnished on a regular basis, in Scottsdale, AZ it can last for 2-3 years. Once Prestige Floor and Carpet Care restores your VCT it is good to have us dry mop, wet mop, and high speed burnish to keep its luster and hardening of the finish. If maintained properly and depending on how much traffic and hours the floor is open to the public, we can do a light top scrub and apply 2 coats every six months. This will make it look awesome.